What size do auger bits come in?

Auger bits are produced in metric sizes ranging from 6mm to 25mm and imperial widths ranging from 1/4″ to 1″. Compared to other types of drill bit, auger bits can be considered to be quite long. The shortest auger bit commonly found is 200mm (8″) long. The longest is 600mm, which equates to 24″ or 2 feet!

What is a ship auger bit?

Auger drill bits are bits used to drill holes into wood. They are commonly used for boring holes into bulkheads and general timber applications.

What number is a 5’8 auger bit?

3043007
IRWIN WeldTec Auger Wood Drill Bit 5/8″ X 17″ (3043007)

What size auger should I buy?

For those that spend the majority of time tempting panfish, a 4 1/2 or 6-inch auger is tops in my book. If your goal is to chase panfish and walleye, then a 6 or 8-inch will certainly shine. I would never choose anything larger than an eight-inch manual auger, as the work simply becomes too hard and overwhelming.

What size auger do I need for fence posts?

A 12-inch auger, best attached to a heavy machine, will create a hole large enough for a 6×6 or 4×6 post and plenty of concrete. Smaller augers, like 4- or 6-inch options, are appropriate for light-duty work like mailboxes as well as metal fence posts for chain-link fences.

Can I use an auger bit in a power drill?

Whereas, auger bits can be used in a hand brace or in a power drill. They do however need to be controlled more carefully if using a power drill, since as they have a lead-in screw they tend to pull through the material, and if you are not careful can be pulled straight through and out the other side.

Can an auger bit be sharpened?

Sharpening begins by filing the spurs of the auger bit, being sure to keep both spurs the same height to ensure they cut evenly. Next, sharpen the main cutting edge. The best way to determine if your bit has been sharpened correctly is to drill a hole with it.

What size auger should you use for a 4×4 post?

For example: A 4×4 post (actual size 3.5″x3. 5″) has a maximum width of just over 5″ (diagonally). Therefore, the 4×4 post will likely fit into a hole drilled by a 6″ diameter auger….Post Holes-