What is the default password for Buffalo LinkStation?

admin
The default username and password are “admin” and “password”. From Settings, click on the “Network” tab on the left and then click on the widget icon to the right of “IP Address”.

How do I connect to Buffalo LinkStation?

Knowledge Base

Connect the LinkStation to your network using the supplied Ethernet cable.
Plug in the AC adapter and connect to the LinkStation.
Power on the LinkStation by moving the switch on the rear of the unit to “On”.
Open NAS Navigator.
Right-click on the LinkStation and choose “Settings” from the pop-up menu.

How do I reset my Buffalo LinkStation password?

Hold down the red button for 10 seconds. The LinkStation will beep (no beep for LS-W TGL/R1). This initialize the LinkStation password and IP address to its factory defaults.

How do I access the Buffalo NAS drive?

Connect the LinkStation to your network with an Ethernet cable and power it on. Launch a web browser and enter the LinkStation’s IP address into the address bar to access Settings. If you do not know the LinkStation’s IP address, you can use NAS Navigator to access Settings instead.

How do you reset the Buffalo TeraStation?

To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.

Can I connect Buffalo LinkStation directly to my computer?

You can check adapter settings: a….How to: Connect a TeraStation or LinkStation directly to a PC.

1.	Connect the Ethernet cable from PC LAN port to the NAS device.
2.	For a PC, double-click the icon. For Mac OS, click the icon in the Dock. NAS Navigator2 will start.
3.	Click [Refresh].

How do I connect to Buffalo?

Setup your Buffalo NAS out of the box

Connect the TeraStation / LinkStation to your network using the supplied Ethernet cable.
Plug in the Power cable / AC adapter and connect to the TeraStation / LinkStation.
Power on the TeraStation / LinkStation by pressing the Power button, or by moving the power switch to “ON”.

How do I change my username and password on the LinkStation?

The default username and password are “admin” and “password”. 4. Navigate to [Users/Groups] – [Local Users]. 5. Select “admin”, then click [Edit User]. 6. Enter a username and the new password (twice), then click [Save]. If you forget the username and password, you can no longer configure the LinkStation!

What information is displayed when the LinkStation is initialized?

The status LED will flash amber during initialization. admin username, admin password, IP address, and Ethernet frame size. If you do not want to initialize the admin password when you initialize the LinkStation, select [Keep current admin password] in the [System] – [Restore/Erase] – “Restore Factory Defaults” screen, then click [Save].

How do I Reset my LinkStation?

1. Move the power switch to the off position to shut down the LinkStation. 2. Move the power switch to the on position while holding down the function button. The function LED will flash blue for a minute. 3. While the function LED is flashing blue, press the function button again. This starts the initialization process. It might take 2-3 minutes.