What is spandek roof?
By Sarah Oconnor
What is spandek roof?
A modern, simple square-corrugated roofing and walling cladding that is strong, impact resistant and economical – ideal for both commercial and residential applications. Highly serviceable roofing and walling cladding. Bold ribs offer high strength and high water carrying capacity. Nominal cover width: 700mm.
How far can Spandek span?
2-1992. Roof spans consider both resistance to wind pressure and light roof traffic (traffic arising from incidental maintenance). Wall spans consider resistance to wind pressure only….Span Table.
| Types of Span | BMT (mm) | |
|---|---|---|
| 0.42 | 0.48 | |
| End Span | 3000 | 3000 |
| Internal Span | 3300 | 3300 |
| Overhang | 300 | 400 |
What is lysaght spandek?
LYSAGHT SPANDEK® is a contemporary looking, trapezoidal profile which is ideal where a stronger, bolder, more modern corrugated appearance is required. It combines strength with lightness, rigidity and economy.
What is Spandek?
SPANDEK® is pierce-fixed to timber or steel supports. This means that fastener screws pass through the sheeting. You can place screws for SPANDEK® through the crests or in the valleys. To maximise roof watertightness, always place screws through the crests. For walling, you may use either crest or valley-fixing.
How much is a roof in the Philippines?
Metal Roofing Prices Philippines
| Metal Roofing Prices | ||
|---|---|---|
| Corrugated Roofing, Gauge 26 (0.551 mm x 2.44mm) | SQ M | 423.00 |
| Pre-painted Metal Roofing Sheet GA 26, Long Span | SQ M | 466.00 |
| Pre-painted Metal Roofing Sheet GA 26, 2.44m | SQ M | 472.00 |
| Pre-painted Gutter, GA 24(0.701 mm) x 2.44m | LN.M | 351.00 |
How many screws are in a sheet of roofing?
Here are two easy formulas for determining the amount of metal roofing screws: Take your square footage and multiply it by 80%. 80 screws for each roofing square.
What does internal span mean?
A continuous beam or slab, both supports of which are continuous with adjacent spans.
How do I stop water running back under my roof?
5 control measures to stop a flat roof leaking
- Install roofing material to the manufacturer’s recommendations.
- Extend roof sheets further into the gutter.
- Install a gutter flashing between the gutter and the roof sheeting.
- Profile fillers at the tops and bottoms of sheets.
How long is long span roofing in Philippines?
What Is a Long Span Roofing? According to Designing Buildings, long-span roofs are roofs that exceed 12 meters in span, unlike the other products.
How do you use spandek roofing sheets?
Spandek is available in .42 and .48 thickness. ROOF – Should be laid square to the gutter line and into the prevailing wind. The sheet is fastened every second rib. Sheets must be turned up at the apex and down at the gutter line. Side lap fastener is recommended mid span when span exceeds 1200mm.
What is a spandek profile?
Description SPANDEK® is a contemporary looking, trapezoidal profile which is ideal where a stronger, bolder, more modern corrugated appearance is required. It combines strength with lightness, rigidity and economy. Can be used for both roofing and walling applications
Why choose Lyssa GHT spandek cladding?
LYSAGHT® SPANDEK® is symmetrical square-corrugated cladding profile for roofs and walls that is strong and impact resistant, ideal where a bolder, more modern appearance is desired. Strength, lightness and high water carrying capacity make it suitable for long roof spans with reduced fastener requirements.
What size screws do you use for spandek?
For wall, installation fix through the low pan of the sheet using 12 x 25 T17 Timber fixing screws or 10 x 16 Steel fixing screws. SPANDEK® is pierce-fixed to timber or steel supports. This means that fastener screws pass through the sheeting.
