How do you mix alodine 1200S?

How do you mix alodine 1200S?

Mix 2 oz. of ALODINE 1200S coating chemical per gallon of water (this is equivalent to 15 g of ALODINE 1200S coating chemical per liter of solution). Stir well until the powder is dissolved. Note A am Note: A small amount of insoluble material may settle out of solution; this can be disregarded.

What is ALODINE 1200S?

BONDERITE® M-CR 1200S AERO (ALODINE 1200S) is a brown, metal pre-treatment powdered chemical used to produce a protective coating on aluminum which minimizes corrosion and provides an improved bond for paint. Surfaces treated with it range in color from a light iridescent golden to tan.

What color is ALODINE 1200?

light iridescent golden
Surfaces treated with the BONDERITE M-CR 1200S AERO (known as ALODINE 1200S) process range in color from a light iridescent golden to tan.

Is alodine 1200 conductive?

Alodine 1200S conforms to MIL-C-5541E Class 1A and 3 coatings, Methods A, B & C application. Alodine coatings are electrically conductive. The resistance of a coating depends upon its thickness and its age.

What does alodine mean?

chromate conversion coating
Also known as chem film or chemfilm, Alodine® is a chromate conversion coating that protects aluminum and other metals from corrosion. In chemical conversion coatings, the metal undergoes a chemical reaction at the surface. This chemical reaction transforms the metal surface into a protective layer.

How do you use Bonderite?

Activate by holding the applicator tip down on the surface to be treated. Press the pen tip down for 15 to 30 seconds to open the spring valve allowing BONDERITE M-CR 1132 AERO to wet the applicator tip. When the BONDERITE M-CR 1132 AERO just wets the tip, release the downward pressure. The unit is ready to use.

What is the difference between alodine 600 and 1200?

Color: Light Iridescent Gold to Tan, depending on aluminum alloy. The differences seen are that the #600 can be applied by an immersion dip, while the #1200 is applied by spray. A toner is used with the #600 and not with the 1200S I hope this helps.

What is the purpose of alodine?

Chem film or Alodine is a chemical conversion coating that’s mostly used to protect aluminum from corrosion. It’s primarily used to passivate aluminum as it protects this metal and serves as a base for paint coatings. It leaves aluminum unaffected, so it’s easier to put paint over it without changing anything.

When should alodine be used?

Alodine is actually a brand. It is an international brand of various materials from Henkel Technologies for use in conversion, anodizing and functional coatings that are suitable for use on aluminum, magnesium and other non-ferrous materials for corrosion protection and paint adhesion.